Introduction
The DDB hydraulic-driven multi-point grease pump is designed for mining, coal mine, construction, port and metallurgical machinery, and it supports explosion-proof hazardous working environments. Constructed with full steel tank and pump body, it delivers stable continuous lubrication. It features 1-20 independent oil outlets, each fitted with an individual relief valve for separate overpressure protection.
Technical Data
|
Description |
Hydraulic Lubrication Pump |
||
|
Class of Protection |
IP65 |
||
|
Displacement |
0.06ml/cy |
0.15ml/cy |
0.2ml/cy |
|
Reservoir Capacity |
4L |
6L |
8L |
|
No. of Outlets |
1-20 |
||
|
Operating Pressure |
350bar |
||
|
Lubricant |
NLGI 0#-2# |
||
|
Transmission ratio |
1:50 |
||
|
Standard Drive Port |
M22X1.5 G1/2 Female |
||
Features/Equipment characteristics
- Explosion-proof hydraulic drive design, safe for underground mining and hazardous flammable environments.
- All-steel tank and pump body structure, durable for long continuous operation.
- Every outlet equipped with separate relief valve (28MPa preset) for individual overpressure protection.
- Standard single/double-cone ferrule pipe joints, compatible with steel, copper pipes and high-pressure hoses.
- Simple disassembly structure for pump core, easy daily cleaning and seal replacement.
Our Advantages
- Unique explosion-proof hydraulic drive, ideal for coal mine, underground engineering where electric pumps cannot be used.
- Independent pressure protection for each circuit, one blocked point won't affect other lubrication branches.
- Full steel heavy-duty construction, strong anti-dust and anti-corrosion performance for harsh heavy industry.
- Fully modular configuration: freely adjust outlet number, flow rate and tank capacity for customized systems.
- Low failure piston matched components, easy spare parts replacement and low maintenance cost.
FAQ
Q1: Can DDB pump work in explosion-risk mine areas?
A1: Yes. Hydraulic explosion-proof design makes it suitable for underground coal mines and hazardous flammable locations.
Q2: The pump runs but outputs no grease or bubbly grease?
A2: 1. Refill grease and exhaust air if tank level is too low;
2. Replace fully aged or overly thick grease;
3. 3. Loosen outlet fitting to release trapped air inside pipelines.
Q3: Pump has pressure but lubrication points get no grease?
A3: Clean blocked relief valve steel ball and spring; replace worn pump piston assembly if internal leakage occurs; dredge blocked pipes and distributors.
Q4: Hydraulic motor runs but pump does not deliver grease?
A4: Pump piston may be stuck by solidified grease. Disassemble, clean pump element and replace damaged seals. Replace hydraulic motor if it is broken.

